[buug] Test message, apologies...

Matt Bockman bonkers at thetechbox.com
Mon Dec 9 19:43:07 PST 2002


I use qmail too, I seem to have flukes every now and then, especially when
it's really important. Like sending an email to my girlfriend....arg

~Matt

----- Original Message -----
From: "Jerry Asher" <jerry-sourceforge at theashergroup.com>
To: <buug at weak.org>
Sent: Monday, December 09, 2002 7:11 PM
Subject: [buug] Test message, apologies...


> Hi,
>
> Last week I sent a message to buug and it never got posted.  Today it
> was returned to me with the information below.
>
> I checked my configuration and it seems to be fine.  On the odd chance
> it was a temporary fluke, or that I can get some more information, I am
> sending this test message.
>
> Does anyone understand what might be going wrong?
>
> Thanks,
>
> Jerry Asher
>
> The message came back as ---------------------------
>
>
> Hi. This is the qmail-send program at theashergroup.com.
> I'm afraid I wasn't able to deliver your message to the following
addresses.
> This is a permanent error; I've given up. Sorry it didn't work out.
>
> <buug at weak.org>:
> TLS found no client cert in control/clientcert.pem
> I'm not going to try again; this message has been in the queue too long.
>
> --- Below this line is a copy of the message.
>
> Return-Path: <jerry-sourceforge at theashergroup.com>
> Received: (qmail 28870 invoked from network); 5 Dec 2002 01:49:47 -0000
> Received: from unknown (HELO theashergroup.com) (127.0.0.1)
>    by 0 with SMTP; 5 Dec 2002 01:49:47 -0000
> Message-ID: <3DEEBA50.1090201 at theashergroup.com>
> Date: Wed, 04 Dec 2002 18:30:40 -0800
> From: jerry <jerry-sourceforge at theashergroup.com>
> User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2) Gecko/20021202
> X-Accept-Language: en-us, en
> MIME-Version: 1.0
> To:  buug at weak.org
> Subject: booting from a failed raided primary ide drive .... or not.
> Content-Type: text/plain; charset=us-ascii; format=flowed
> Content-Transfer-Encoding: 7bit
>
> I am building a machine to be colo'd. I have never done this before.
>
> So I took two brand new IDE drives, same model, and installed them,
> master/slave on the first IDE channel. (I have since learned that that
> is not optimal, but that's the way it is for now.)
>
>
> _______________________________________________
> Buug mailing list
> Buug at weak.org
> http://www.weak.org/mailman/listinfo/buug
>




More information about the buug mailing list